







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Irving, TX
Vanities, tile and fixtures is the visible half of a bathroom remodel – the parts you touch every morning and notice every time you walk past the door. A new vanity sets the footprint and the storage, tile decides how the room holds up to steam and splashes, and fixtures tie water, light and finish together. In Irving, most of this work happens in homes built between the 1970s and early 2000s, where the original vanity cabinet is swollen at the toe kick, the shower tile is grouted in a discontinued 4-inch white, and the faucet was replaced once in 2009 with whatever was on the shelf. We handle all three as one scope, because tile, vanity and fixtures fail together when they’re planned separately. Call (844) 320-5939 and a live person answers, day or night, to set up a free written estimate.
This page covers the finish side of bathroom remodeling, and it’s the piece most homeowners ask about first, because it’s what changes the room. If your project also involves moving a drain, reframing a shower or taking a wall down, that scope lives on our Bathroom Remodeling in Irving page. Everything here is done by technicians with up to 22 years of experience, and every project comes with a written price before we touch a single tile.
Key Takeaways
- Vanity, tile and fixture packages in Irving typically run $6,500 to $18,000 depending on tile selection, vanity size and whether the shower is being rebuilt.
- We give you a written price before any work starts, and that number is the number on the invoice.
- Every job is covered by our 365-Day Done Right Promise in writing. If the work fails inside that year, we come back and fix it at no charge.
- The technician who knocks on your door is background-checked and arrives in uniform, so you know who’s in your house.

When You Need Vanities, Tile & Fixtures
Some of these are cosmetic and some are actively doing damage every time you shower. Either way, the diagnosis matters more than the sales pitch. Here’s what we see most in Irving:
- The vanity cabinet is soft at the bottom. In Las Colinas condos and older homes off Story Road, we regularly find particleboard vanities that have been wicking moisture for years. If the toe kick gives when you press it, the cabinet is done – refinishing won’t save it.
- Tile grout is cracking or the shower pan is flexing. Cracks that reappear in the same line every few months usually mean movement underneath, not bad grout. The fix is the substrate (the layer behind the tile), and it’s worth finding out early.
- The faucet drips and the finish is peeling. A Moen or Kohler cartridge is a small job. A 20-year-old builder-grade faucet with a flaking finish usually means the whole fixture set is due, and replacing them together keeps the finish matched.
- You’re updating before a sale or after moving in. A bathroom that reads “1998” in listing photos costs you offers. New tile, a quiet vanity and new fixtures is the fastest visual upgrade in the house.
- A single tile is loose or hollow-sounding. Hollow tile near a shower valve or the toilet flange often means water has been getting behind it. That’s a “look now, not later” situation in a climate that swings from humid summers to dry winters.
- The layout works but the room doesn’t. Sometimes you don’t need a remodel. You need a taller vanity, better lighting, or tile that isn’t trying to be a focal point. That’s the job we like most.
Our Vanities, Tile & Fixtures Process
Every project under our roof follows The Kingswell Way: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it. Here’s how that plays out for vanities, tile and fixtures.
- Free in-home walkthrough. We measure the room, look at the substrate behind the existing tile, check the shutoffs and the venting, and ask what you actually use the room for. You get our read on what’s cosmetic and what’s structural.
- Written price, before any work. No verbal ballpark, no “we’ll see after demo.” You get a line-item written price that covers materials, labor and cleanup. That number holds, even if demo reveals a surprise we should have caught.
- Material selections. We work from recognized trade brands, including KraftMaid vanities and Wellborn cabinetry, plus Cambria, Silestone and Caesarstone tops and Kohler, Moen and Delta fixtures. You pick finishes; we spec what fits the room and stands up to daily use.
- Demo and substrate prep. We pull the old vanity, tile and fixtures, then install cement board substrate (the moisture-resistant layer behind your tile) and address any rot or framing we find along the way.
- Install and finish. Vanity set and leveled, tile set and grouted, fixtures installed and tested, caulk lines clean and consistent. The last thing we do is test every valve and wipe the room down.
- Walkthrough and the written guarantee. We walk you through the finished room, hand over the paperwork, and explain exactly what the 365-Day Done Right Promise covers and what happens if something fails.

Vanities, Tile & Fixtures Pricing in Irving
Vanity, tile and fixture packages in Irving usually run $6,500 to $18,000. The low end is a stock vanity, ceramic floor tile and basic fixtures in an existing layout. The high end is a custom vanity with a quartz top, a rebuilt shower with new substrate, and full fixture replacement. Here’s what drives the number:
| Line item | Typical Irving range | What moves it |
|---|---|---|
| Vanity cabinet (stock to semi-custom) | $900 – $3,200 | Size, door style, whether the top is included |
| Countertop (quartz or solid surface) | $700 – $2,400 | Cambria and Silestone carry premium; length and edge profile matter |
| Floor tile (install + material) | $1,800 – $4,500 | Tile type, layout, whether the subfloor needs work |
| Shower wall tile and substrate | $2,200 – $6,500 | Waterproofing system, tile size, niche and bench details |
| Fixtures (faucet, shower valve, drain, lighting) | $800 – $3,000 | Brand tier (Kohler and Moen at the high end) and finish |
| Labor and cleanup | Included in each line above | – |
What drives a bathroom package up in Irving specifically: shower rebuilds where the old pan has to come out, slab-on-grade homes where moving the drain means cutting concrete, and homes where the wall behind the tile is water-damaged. None of those are worst-case scenarios – they’re normal – but they do change the number, and we’d rather tell you on day one.
Two layers of protection sit behind every job. The Kingswell Guarantee gives you a written price, a defined arrival window, a clean site and a written guarantee on the project. And every product we install – from KraftMaid cabinets to Kohler fixtures – carries its own manufacturer warranty alongside ours. If you’re also planning to touch the exterior while you’re at it, our James Hardie siding in Irving page covers that side of the house.
Every estimate is free. Call our free estimate page or dial (844) 320-5939 and we’ll get you on the calendar.
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity and tile package cost in Irving?
A vanity, tile and fixture package in Irving typically runs $6,500 to $18,000, depending on tile type, vanity size and whether the shower is being rebuilt. Standard vanities with ceramic floors land near the bottom; custom vanities with quartz tops and new shower tile land near the top. Call (844) 320-5939 for a written price tailored to your room – estimates are free.
Can you install tile and fixtures over my existing substrate?
Rarely, and only when the substrate is sound and dry. In most Irving homes older than about 20 years, the tile has been sitting on moisture-damaged drywall rather than cement board, and new tile laid over it will crack or mold inside a year. We check the substrate during the free walkthrough and tell you honestly whether it holds up.
How long does a vanity, tile and fixture job take?
A vanity and floor tile replacement in a standard Irving hall bath takes 3 to 5 working days. If the shower is being rebuilt with new substrate, budget 7 to 10 working days. We give you a defined arrival window before each phase, and the crew leaves the site clean every day.
What happens if something fails after the job is done?
We come back and fix it at no charge. Every job is covered by our 365-Day Done Right Promise in writing, and the return visit is free – no service call, no re-inspection fee. If a tile cracks, a valve drips or a cabinet door warps inside the year, call (844) 320-5939 and a real person will schedule the fix.
Can you help me choose tile and fixtures that fit my house?
Yes. We bring samples and spec from recognized brands – KraftMaid and Wellborn vanities, Cambria and Silestone tops, Kohler and Moen fixtures – and match them to your room’s light, size and traffic. Nobody’s pushing a style on you. You pick, we spec what will hold up.
Ready to Price Your Bathroom?
If your vanity is soft, your tile is loose or your fixtures are older than your phone, the next step is a free walkthrough and a written price. Call Penhallow Remodeling Irving at (844) 320-5939 and a live person will pick up – not a voicemail prompt, not a callback window. We’ll talk through what you’re seeing, come look at it, and put a real number in writing before any work starts. Background-checked, uniformed technicians. Every project covered by our 365-Day Done Right Promise and the Kingswell Guarantee. No pressure and no surprises – just a price you can hold us to.
Written by the team at Penhallow Remodeling Irving, serving Irving.


