







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Kitchen Island Installation Costs in Irving, TX (and What Most Quotes Leave Out)
Kitchen island installation in Irving runs $3,000-$10,000 for the island itself, and add $400-$900 if your kitchen has no circuit positioned for it - which is the case in most Irving homes built before 1990. A quote that doesn’t name the electrical rough-in isn’t a quote. It’s a starting bid. Call Penhallow Remodeling Irving at (844) 320-5939 for a written price that line-items carpentry, electrical, and plumbing before anyone touches a cabinet.
Here’s the problem we see every week. Homeowners near downtown Irving and in the brick ranch tracts off Valley Ranch get a friendly verbal number for an island, sign it, and then discover on invoice day that the electrician was “separate.” The City of Irving requires a permit for a new electrical circuit, and an inspection happens whether you planned for it or not. That’s not a surprise if you priced it in from the start. This page prices it in.

The four line items behind every Irving island price
An island is four jobs stacked on top of each other. Treating them as one lump sum is how prices balloon. Here’s how each piece actually breaks out in Irving labor and materials.
| Line item | What it covers | Typical range |
|---|---|---|
| Island cabinet & structure | Base cabinetry, framing, toe kick, panel finished on all exposed sides, installation labor | $1,400-$4,800 |
| Countertop | Quartz or stone slab, edge profile, cutouts, template and install labor | $900-$3,200 |
| Electrical rough-in | New dedicated circuit, permit, wire run, outlet or pop-up installation | $400-$900 |
| Plumbing rough-in (if you add a sink) | Supply and drain lines, venting, permit, sink and faucet hookup | $700-$2,100 |
Add those up and you land inside the $3,000-$10,000 range we quote for the island on its own. The spread comes from size, cabinet line, countertop material, and whether you’re running a sink. We install KraftMaid and Wellborn cabinetry and set Cambria, Silestone, and Caesarstone quartz, and each of those carries its own manufacturer warranty alongside ours - worth asking about when you compare bids.
Why Irving’s slab-on-grade homes change the electrical math
Most Irving housing stock sits on a post-tension concrete slab. There’s no crawl space to belly under, so a new circuit for an island has to travel through the walls or up and across the ceiling to reach the middle of the room. That takes longer than a run in a pier-and-beam house, and labor time is what you’re paying for. It also means the electrician has to plan the path before the island goes in, not after.
The same goes for a sink. Drain lines need slope to work, and on a slab the drain usually ties into a wall or runs through the ceiling cavity above. That’s a real plumbing decision, not a plumbing afterthought. If your kitchen already has a nearby circuit and no sink plan, you’re on the low end. If you want a prep sink plus a pop-up outlet in a 1970s ranch with a full slab, plan on the high end. We explain what “substrate” means in the same breath as we hand you the number, so nothing on the invoice is a word you’ve never heard.
A quick note on the airport corridor: Irving sits under the DFW flight path, and Las Colinas and the areas near the former Texas Stadium site see constant infill and redevelopment. That doesn’t change island pricing, but it does mean permit traffic at the City of Irving can run slower during heavy build-out periods - one more reason to lock the schedule in writing.

What our written price actually itemizes
The Kingswell Way is simple: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it. That standard is why every Penhallow Remodeling Irving estimate lists each trade on its own line - carpentry, electrical, plumbing - instead of one number with a footnote. You’ll see the permit cost, the inspection allowance, and the countertop template fee named before a single cabinet is pulled.
Here’s what’s included in the written price on a standard island install:
- Cabinet and structure line, with the cabinet brand and door style named
- Countertop slab, edge, cutouts, and templating - Cambria, Silestone, or Caesarstone listed by name
- Electrical circuit run, permit, and outlet installation as a separate line
- Plumbing rough-in and fixture hookup if a sink is part of the plan
- City of Irving permit and inspection costs, spelled out
- The 365-Day Done Right Promise, in writing, covering the whole installed island
That last point matters more than it sounds. The 365-Day Done Right Promise covers the full island - the countertop seam, the outlet function, the drawer operation - not just the cabinet boxes. If a drawer starts dragging in month eight or an outlet stops working, we come back and fix it at no charge. If a repair ever fails inside the guarantee period, there’s a free return visit with no service call and no re-inspection fee. If you’re weighing this against a larger remodel, our Kitchen Remodeling page shows how island work fits into a full kitchen scope.
Common Irving scenarios (and what they usually cost)
South Irving brick ranch, no existing outlet, no sink. The most common job we see. Circuit run through a wall, pop-up outlet in the island top, standard base cabinet with a quartz top. Typically $3,200-$4,800.
Valley Ranch 1980s tract home, island with a prep sink. Slab work plus a drain tie-in makes the plumbing line real. Usually $5,500-$8,000.
Las Colinas condo or townhome with a galley layout. Tighter clearances mean a smaller, more custom footprint. Runs $3,000-$4,500, but the outlet plan has to be measured to the inch.
Full kitchen reface plus island. When the island goes in alongside cabinet and countertop work, it’s easier to price as one project. Full kitchen remodeling in Irving typically runs $14,000-$45,000 depending on layout, cabinet line, and countertop material.
Do you need a permit for a kitchen island in Irving?
Yes, if the island adds a new electrical circuit or a sink, the City of Irving requires a permit and the work gets inspected. Any contractor who tells you to skip it is handing you a problem at resale time - unpermitted electrical work surfaces in a buyer’s inspection and can stall a closing. We pull the permit as part of the written price so it’s never a surprise line item later. That inspection is also a good thing: it’s a second set of eyes confirming the outlet behind your island is safe and to code.
Because the job touches live wiring and, when a sink is involved, water lines into a slab, this isn’t a weekend DIY project. A dedicated circuit run and a drain tie-in call for a licensed electrician and plumber, and our technicians - with up to 22 years of experience - coordinate both so the island goes in on one schedule, not three.
To compare the broader cost of a full renovation, see our guide on Kitchen Remodeling in Irving.
FAQs
Kitchen island installation in Irving typically costs $3,000-$10,000 for the island, with electrical rough-in adding $400-$900 and a sink adding $700-$2,100. The number depends on size, cabinet line, countertop material, and whether you’re adding a circuit or a prep sink. Call (844) 320-5939 for an exact written quote - estimates are free.
Yes. In most Irving homes built before 1990 there’s no circuit positioned for an island, so we run a new dedicated line through the walls or ceiling and install a pop-up or standard outlet as part of the job. The circuit, permit, and inspection are line-itemed in the written price. Call (844) 320-5939 to get yours priced.
Extending an existing counter is usually cheaper when the footprint allows it, but on a slab-on-grade Irving kitchen the utility runs are what drive cost either way. A standalone island gives you more usable prep space and a clean electrical plan. We’ll tell you honestly which fits your layout before you spend a dollar. Call (844) 320-5939 for a free walkthrough.
It covers the full installed island - the countertop seam, the outlet function, and the drawer operation, not just the cabinet boxes - for a full year. If something fails, we come back and fix it at no charge, with a free return visit and no re-inspection fee. Call (844) 320-5939 to start with a written price.
Get your island priced in writing
Before you commit to a number, get one you can hold us to. Penhallow Remodeling Irving puts a written price in your hands before any work starts - cabinets, countertop, electrical, plumbing, permit, all on their own lines. Call (844) 320-5939 for a free estimate, and a real person answers, day or night.
Written by the team at Penhallow Remodeling Irving, serving Irving, TX.
What Our Customers Say
"We'd been burned by a contractor before who disappeared halfway. Penhallow finished on time and stood behind everything. The written price gave me peace of mind the whole way."
- Simone Clarke"Good remodel of two bathrooms. A fixture came in wrong and added a few days, but they ate the cost of fixing it. Finish work is excellent and they cleaned up daily."
- Rudy Mackey"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike












