







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat a Small Kitchen Remodel Really Costs in Irving, TX
A small kitchen remodel in Irving typically runs $9,000-$20,000 for a cosmetic refresh, and $22,000-$38,000 once you account for the plumbing rough-in and cabinet count that 1970s Irving ranch homes carry. “Small” describes the floor, not the bill. Call (844) 320-5939 for a written price before anything gets pulled, and we’ll walk your Valley Ranch or south Irving kitchen and tell you what the job actually takes.

Why a 90-Square-Foot Irving Galley Kitchen Costs Like a Bigger One
A 90-square-foot galley kitchen in a Valley Ranch ranch home has roughly the same number of base cabinets as a 150-square-foot suburban kitchen. It just has them packed tighter. That’s the piece most homeowners miss when they price a small remodel in their heads.
Irving’s 1970s galley and U-shaped kitchens usually fall between 80 and 110 square feet. Inside that footprint, you’ll find 15 to 22 linear feet of base cabinetry. Cabinet cost tracks linear feet, not floor area. So a KraftMaid or Wellborn order for a “small” Irving kitchen can land right where a medium kitchen would, which is exactly why the $22,000-$38,000 number surprises people who expected proportional savings.
The tight layout brings other work with it. More cabinet boxes mean more fasteners into older walls. More slab penetrations for the sink, dishwasher, and any relocated drain. A U-shaped kitchen often has a plumbing wall shared with a bathroom or utility room, and that shared wall can hide surprises once the cabinets come off. If you want the full room-by-room breakdown rather than the small-kitchen slice, our Kitchen Remodeling page covers it end to end.
The Plumbing Line Nobody Warns You About
Here’s the detail that separates a real small-kitchen quote from a cosmetic one. A kitchen in a 50-year-old Irving ranch very likely still has original galvanized supply lines and a cast-iron drain under the slab. Galvanized steel corrodes from the inside out; by the time it’s 50 years old, the flow is pinched and the joints are ready to weep. Cast-iron drain lines scale and eventually crack.
You can resurface a countertop and paint a cabinet box without touching those lines. You can’t responsibly ignore them, though, when you’re already in the wall. Patching around aging pipe and calling it done is a code problem waiting to surface, usually the week after the crew leaves. Updating the supply and drain during the remodel adds $1,500-$3,500, and it belongs in the written price on day one, not as a change order on day twelve.
North Texas clay makes this sharper. The expansive soils under Irving swell and shrink with the wet-dry cycle, and slabs move. A cast-iron drain that survived 40 stable years can crack once the slab shifts around it. When we open a wall in south Irving, we plan for what the soil has been doing.

Countertop Cost: Why Small Doesn’t Save You Much
Homeowners expect a small kitchen to cut the countertop cost roughly in half. It usually doesn’t. In a galley layout, a single slab of Cambria or Caesarstone often covers the entire countertop run. Fabricators charge a minimum for cutting, templating, and finishing a slab no matter how much of it your kitchen uses. That minimum, not the per-linear-foot rate, drives the invoice.
The practical result: a small Irving kitchen and a medium one can land within a few hundred dollars of each other on quartz. A single-slab Cambria job typically fits inside a $2,000-$6,500 countertop line. The Cambria carries its own manufacturer warranty, and it sits alongside our own written guarantee, so you’ve got two layers of protection behind the same surface.
Here’s the line-item picture for a small Irving kitchen, with the ranges we hold to:
| Line item | Typical cost (Irving) |
|---|---|
| Small kitchen remodel, full scope | $9,000-$20,000 |
| Full kitchen remodel (layout, cabinets, counters) | $14,000-$45,000 |
| Cabinet installation (KraftMaid, Wellborn) | $4,000-$13,000 |
| Countertop installation (Cambria, Silestone, Caesarstone) | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Kitchen island installation | $3,000-$10,000 |
| Supply and drain line update (added during remodel) | $1,500-$3,500 |
Why the Written Price Matters Most on a Small Budget
A $5,000 surprise plumbing update on a $50,000 remodel is 10%. Annoying, but absorbable. That same $5,000 surprise on a $22,000 small kitchen is 23%, and it can break the budget outright. Homeowners with smaller projects are the most exposed to change-order abuse, because there’s less cushion to absorb it.
That’s why Penhallow Remodeling Irving puts the price in writing before any work starts. Not a range, not a verbal ballpark you’re expected to remember. A written number you can hold us to, so the number on day one is the number on the invoice. It’s how we run every job under The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
Common Small-Kitchen Scenarios We See Around Irving
The same floor plan produces different quotes depending on what’s behind the cabinets. A few patterns come up again and again.
- The cosmetic-only refresh in Valley Ranch: New cabinet fronts, fresh paint, a quartz counter, no layout change, no plumbing work. This is the scenario that lands near the bottom of the small-kitchen range.
- The galley with the original plumbing wall: The homeowner wants new cabinets and counters, but the galvanized supply lines are 50 years old. Adding the supply and drain update is the honest call, and it belongs in the written price at the start.
- The U-shaped layout with a moved sink: Relocating the sink means a new slab penetration and a longer drain run. The cabinet count stays the same, but the plumbing line climbs.
- The south Irving post-war kitchen: Older housing stock means more unknowns behind the walls, and the honest answer is that we price the visible scope in writing and flag the likely surprises before demo day, not after.
Irving sits under the DFW Airport flight path and straddles the Las Colinas corridor, which means most of the work here is tear-out-and-replace renovation in built-out neighborhoods rather than new construction. That shapes what we find behind the walls: original 1970s plumbing, original wiring, and slabs that have been moving on North Texas clay for five decades.
How Long Should a Small Kitchen Remodel Take in Irving?
A small galley remodel with no layout change typically runs 4 to 6 weeks in Irving, against 8 to 12 weeks for a full reconfiguration. The catch is cabinet lead time. KraftMaid and Wellborn orders take weeks to arrive, so the reliable timeline only holds if the general contractor pre-orders cabinets at permit submission, not after demo. Ask any contractor you’re considering when they place the cabinet order relative to the permit. The answer tells you whether the schedule is real.
FAQs
A small kitchen remodel in Irving runs $9,000-$20,000 for a cosmetic refresh, and $22,000-$38,000 when plumbing updates and a full cabinet replacement are included. The cabinet count and plumbing age drive the number more than floor area. Call (844) 320-5939 for an exact written quote; estimates are free.
Replacing is usually the better value in a 1970s Irving ranch, because the cabinet boxes and the plumbing behind them are the same age. Refacing saves money up front but leaves 50-year-old supply lines untouched. If the layout works and the pipes are sound, a refacing job can hold; if they’re not, replacement is the honest call. Call (844) 320-5939 and we’ll tell you which one your kitchen actually needs.
Yes. A live person answers our phone 24/7 and we’ll set a real arrival window for the walk-through this week. You get a written price before any work starts, and our technicians are background-checked and arrive in uniform. Call (844) 320-5939 to book the visit.
It covers the work we do: if anything fails inside the year after we finish, we come back and fix it at no charge, and it’s written into every project. Our technicians bring up to 22 years of experience to the job, and the promise sits alongside the manufacturer warranties on your Cambria or KraftMaid products. Call (844) 320-5939 with questions about what’s covered.
Get Your Written Price Before Demo Day
Small kitchens in Irving hide real scope behind the cabinet boxes, and the only way to price one honestly is to look before you commit. We’ll walk your kitchen, flag the plumbing age and cabinet count in writing, and give you a number you can hold us to. Call (844) 320-5939 for a free estimate today.
Written by the team at Penhallow Remodeling Irving, serving Irving, TX.
What Our Customers Say
"We'd been burned by a contractor before who disappeared halfway. Penhallow finished on time and stood behind everything. The written price gave me peace of mind the whole way."
- Simone Clarke"Good remodel of two bathrooms. A fixture came in wrong and added a few days, but they ate the cost of fixing it. Finish work is excellent and they cleaned up daily."
- Rudy Mackey"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike












