







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Kitchen Remodeling in Irving: What to Know First
We install and remodel Cambria quartz kitchens in Irving as an independent Cambria service provider, and most full Cambria kitchen remodels run four to eight weeks from demo to final walkthrough. Cambria countertop fabrication and installation alone typically lands between $2,000 and $6,500 for an Irving kitchen, and a full remodel with Cambria surfaces runs $14,000 to $45,000. You get a written price before we pull a single cabinet, so the number you see on day one is the number on your final invoice.
This page is for Irving homeowners who already have Cambria quartz in the kitchen, or who’ve decided Cambria is the surface they want, and now need a remodeler who understands the material. Call (844) 320-5939 to schedule your free estimate.
How Cambria Products Fail – and How We Fix Them

Cambria quartz is dense and non-porous, so it resists most of what ruins other kitchen surfaces. What goes wrong in Irving kitchens tends to be installation or substrate problems, not the quartz itself. Here are the failures we actually see, and what we do about them.
- Seam separation on island and peninsula runs. Cambria’s larger slabs get joined over sinks and islands, and those seams open when the cabinet frame under them shifts. In Irving’s clay-heavy soil, slab foundations move with seasonal moisture, and a kitchen island that wasn’t shimmed and leveled properly will crack its seam within a couple of years. We re-level the cabinet run, reset the substrate, and rejoin the seam with color-matched epoxy.
- Cracking at sink cutouts. A sink cutout is the thinnest unsupported part of any Cambria countertop, and cracks start there when the cutout wasn’t polished and sealed at the edge or the sink was set without proper support brackets. We inspect the cutout edge, add support, and replace or repair the affected section.
- Thermal shock near built-in appliances. Cambria handles heat better than most quartz brands, but a countertop set too close to a slide-in range or a heat-producing appliance right beside it can develop hairline fractures. We check appliance clearances and rebuild the counter run with proper heat separation.
- Dull or hazy spots from abrasive cleaners. Cambria’s finish is factory-applied and doesn’t need sealing, but scrubbing pads and acidic cleaners leave a haze that homeowners mistake for wear. We refinish the surface with the correct abrasive sequence and tell you what to keep out of the cabinet under the sink.
- Lifting or rocking slabs. When the cabinet boxes underneath weren’t squared and shimmed to a true plane, a Cambria slab will rock, and a rocking slab telegraphs stress into every seam and corner. We pull the slab, correct the cabinetry, and reset it.
One detail Cambria’s own site won’t tell you: their quartz carries a transferable lifetime warranty on the material from the manufacturer, but that warranty doesn’t cover installation-related failures like seam separation or unsupported cutouts. That gap is why the install matters as much as the slab.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Cambria Kitchen Remodeling Process
- 1
Phone call and site visit. We ask what’s failing and how long it’s been failing, then walk the kitchen. You get a written price before we touch anything.
- 2
Diagnostics. We check the cabinet frames for square and level, inspect every seam and cutout, and confirm whether the problem is the surface, the substrate, or the cabinetry underneath.
- 3
Parts and material decision. Cambria slabs come from their own quarries and fabricators, so we source through the proper Cambria channel. For everything else we quote recognized trade brands: KraftMaid or Wellborn cabinetry, Kohler or Moen fixtures, Silestone or Caesarstone if you’re comparing quartz options. You see the pricing before we order.
- 4
The work. Cabinets corrected or replaced, substrate rebuilt, Cambria slabs templated, fabricated, and set. We pull permits where Irving requires them and you get the inspection records.
- 5
The check. We test every seam, set a level on every slab, and run water through the sink and dishwasher before we call it done. If something isn’t right, we fix it before we leave.
- 6
Cleanup and guarantee. The site is left cleaner than we found it, and the written 365-Day Done Right Promise comes with the job.
See the difference
Before
After
Before
After
Before
AfterWhat Cambria Kitchen Remodeling Costs in Irving

These are real ranges for Irving kitchens, not ballpark guesses. What you pay depends on layout, cabinet line, and how much of the kitchen gets touched.
| Job | Typical Irving range |
|---|---|
| Full kitchen remodel with Cambria surfaces | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cambria countertop installation | $2,000 – $6,500 |
| Cabinet installation (under Cambria) | $4,000 – $13,000 |
| Backsplash (tile, set against Cambria) | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The number moves up with larger slab runs, a waterfall edge, a new island, or cabinet replacement rather than refacing. It moves down when you keep the boxes and only replace the surfaces. Every estimate is free, every price is written, and the price we give you is the price we hold you to.
Why Irving Homeowners Call Penhallow Remodeling Irving for Cambria Work
We give a written price before any work starts, not an estimate range that balloons after demo day. Every project carries the 365-Day Done Right Promise in writing: if our work fails inside that year, we come back and fix it at no charge, and if a repair fails we make the second visit free. Our technicians are background-checked, arrive in uniform, and have up to 22 years of experience with quartz installations. A real person answers the phone 24/7, not a voicemail maze. And because we work across recognized trade brands – KraftMaid, Wellborn, Kohler, Toto, Silestone, Caesarstone, Moen – you’re not locked into one product line to get the kitchen you want. Penhallow Remodeling Irving operates under The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
FAQs

It can, if the install isn’t done right. Cambria’s lifetime warranty covers material defects, not installation failures, so a sloppy cabinet job that shifts under the slab voids your protection for that issue. We install cabinets to a true level plane and document the install so the warranty holds.
Yes, most seam separations, edge chips, and cutout cracks can be repaired. We typically repair a seam or chip for far less than a replacement slab, and if a section has to come out we quote the replacement in writing first. If the crack goes through the slab thickness, replacement is usually the honest answer.
A full remodel runs four to eight weeks, and a countertop-only swap runs one to two weeks once fabrication is scheduled. Cambria slabs are templated in your kitchen and fabricated to measure, which adds a step but gives a tighter fit at every seam.
Yes, when the scope requires it. Cabinet replacements and layout changes that touch electrical or plumbing get permitted, and you get the inspection records when the work is signed off.
Usually we can match or come close if the line is still in production. Cambria discontinues some series over time, so we check availability first, then tell you plainly whether a partial replacement will look seamless or whether replacing the full run is the better call. Either way you get a written price before we order.
Call Penhallow Remodeling Irving at (844) 320-5939 to schedule your free estimate. We’ll give you a written price and a written guarantee before any work starts, and a real person will answer when you call.
Written by the team at Penhallow Remodeling Irving, serving Irving and nearby areas.












