
General Contractor Pricing Breakdown: What Irving Homeowners Pay in 2026
Two Irving homeowners can receive bids of $28,000 and $41,000 for the same kitchen remodel and have no idea which one is fair, because neither bid explains what “labor” or “materials allowance” actually means in writing. That gap is where money gets lost. This guide translates contractor pricing into plain numbers so you know exactly what you’re buying before you sign anything. If you’d rather skip the guesswork, call (844) 320-5939 and we’ll walk you through a written price for your project.
What does a general contractor actually charge for in Irving in 2026?
A general contractor’s price in Irving breaks into four buckets: labor, materials, permits and inspections, and overhead plus profit. Labor runs roughly 40-50% of a typical remodel budget in the Dallas-Fort Worth market, materials 30-40%, permits and fees 3-8%, and the contractor’s margin the rest. The problem is that most bids collapse all four into one lump sum, so you can’t see where the money goes. A written line-item quote separates them. When we price a kitchen in Irving, you see the cabinet allowance, the countertop allowance, the tile labor rate, the permit cost for the City of Irving, and the disposal fee as separate lines. That’s the difference between a number you can compare and a number you have to trust.
What do common Irving remodels cost in 2026?
These are the ranges we see for Irving-area projects in 2026, not national averages pulled from a cost database. Actual prices swing with layout, cabinet line, and finish level.
- Kitchen remodel: $28,000-$75,000. A galley refresh with stock cabinets and laminate lands near the bottom; a full gut with an island, KraftMaid or Wellborn cabinetry, and Cambria quartz pushes past $65,000.
- Bathroom remodel: $12,000-$32,000. A hall bath with a tub-and-tile surround sits around $12,000-$18,000; a primary bath with a walk-in shower, Kohler or Moen fixtures, and dual vanity runs $22,000-$32,000.
- Room addition: $180-$320 per square foot. A 300-square-foot addition in Irving typically lands between $54,000 and $96,000 depending on foundation work and roofline tie-in.
- Full interior remodel: $90,000-$220,000 for a whole-home refresh covering kitchen, baths, flooring, and paint.
Notice the spread. The low end and high end of a kitchen differ by cabinet line and countertop material more than by square footage. That’s why comparing two bids without comparing the allowances inside them is comparing nothing.
What does a contractor bid include, and what gets left out on purpose?
A complete bid names every line. What you’ll often see left out, sometimes deliberately, includes permit fees, demolition and haul-away, substrate repair behind tile (the cement board layer), drywall patching after electrical work, and finish carpentry like trim and crown. Those omissions are why a “cheaper” bid grows by 15-25% once demo starts. In Irving, older homes near the Heritage District commonly hide cast-iron drain issues and undersized electrical panels behind the walls, and a bid that doesn’t address contingency for those surprises is really just a starting number. A written price should state what’s included and name a fixed contingency so the number on day one is the number on the invoice.
How do you compare two bids that look different on paper?
Put both bids side by side and match scope line for line. If one says “tile allowance $2,500” and the other says “tile allowance $6,000,” the higher bid may actually be the cheaper one once you price the tile you want. Line up these five items on every bid:
- Cabinet brand and door style. KraftMaid and Wellborn are recognized lines with traceable pricing; “premium cabinets” is not a specification.
- Countertop material and thickness. Cambria, Silestone, and Caesarstone quartz each carry their own warranty terms.
- Fixture brands. Kohler and Moen have published list prices you can look up yourself.
- Permit responsibility. Who pulls it and who pays the City of Irving fee?
- Change order language. What triggers a change, and who signs off on the new price before work continues?
When two Irving bids differ by $13,000, one of those five lines usually explains it. If it doesn’t, ask. A contractor who can’t walk you through the difference in plain terms is telling you something.
Related services in Irving: if your project centers on one room, our Kitchen Remodeling in Irving and Bathroom Remodeling in Irving pages break down scope and pricing for those jobs specifically.
Why does a written fixed price matter more than the number itself?
A verbal estimate that “changes at the door” always costs more in the end, because you have no written number to hold anyone to. A written fixed price does three things: it locks the scope, it names the finish level, and it gives you a document to point at if a surprise appears. The Kingswell Way says it plainly: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it. That standard is why every Penhallow project in Irving starts with a written price and a written 365-Day Done Right Promise. If the work fails inside that year, we come back and fix it at no charge. The price is the promise, and the promise is in writing.
What pricing red flags should Irving homeowners watch for?
Most bad contracts announce themselves before demo day. Watch for these:
- A deposit over 30-40%. A large upfront payment protects the contractor, not you. Materials for a kitchen don’t require half the contract in cash before a cabinet is ordered.
- No materials breakdown. If the bid won’t tell you what cabinet or countertop line it’s buying, it’s leaving room to downgrade.
- Vague change order language. “Additional work billed at prevailing rates” is a blank check. A change order should name the work and the price before it starts.
- No permit mentioned. The City of Irving requires permits for structural, electrical, and plumbing work. A bid that skips permits is skipping inspections.
- A handshake and a range. “Somewhere around $40,000” is not a price. It’s a guess you’ll be paying for later.
When to call a pro: if your project touches walls, wiring, plumbing, or a load-bearing change, the permitting and sequencing are where DIY budgets quietly collapse. That’s not a job for a weekend and a YouTube tab.
How do Irving homeowners know a quote reflects local market conditions?
Irving sits in the middle of the DFW construction market, and prices here track the region, not the national average. Labor rates in Irving run close to Dallas and Fort Worth rates, and material availability from local suppliers keeps cabinet and countertop lead times predictable. The neighborhoods matter too: a 1970s ranch near Las Colinas may need a full electrical panel upgrade before a kitchen remodel, while a newer build in Valley Ranch often doesn’t. A contractor who prices Irving projects regularly knows which surprises show up where. Ask your contractor what they typically find in homes like yours in this city. The answer tells you whether the bid was built for Irving or copied from a template.
When should you call a pro rather than price it yourself?
Call a professional the moment your project involves a permit, a structural change, or anything behind the drywall. That covers most kitchen and bathroom remodels, every addition, and any full interior update. A general contractor coordinates the trades, pulls the permits, manages inspections, and carries the insurance and guarantee that protect you if something goes wrong. That coordination is a real cost, and it’s worth knowing what it buys before you decide to go without it. Our technicians have up to 22 years of experience on these jobs, and we answer the phone around the clock – a live person, not a voicemail prompt.
If you want the broader picture of what a general contractor handles on an Irving project, our General Contractor in Irving page covers scope, permitting, and scheduling, and you can always start from the Penhallow Remodeling Irving home page.
The Bottom Line
In Irving in 2026, a kitchen remodel runs $28,000-$75,000, a bathroom $12,000-$32,000, an addition $180-$320 per square foot, and a full interior remodel $90,000-$220,000. The number that matters isn’t the lowest bid – it’s the written bid with separated line items, named materials, and clear change order language. A verbal range that grows after demo day always costs more than a written fixed price from the start. If you’re in Irving and need help pricing your project, Penhallow Remodeling Irving offers free estimates – call (844) 320-5939 to schedule yours.
Frequently Asked Questions
A kitchen remodel in Irving typically costs $28,000-$75,000, with layout, cabinet line, and countertop material driving most of the spread. Call (844) 320-5939 for an exact quote on your kitchen – estimates are free.
Not on a written fixed-price contract. The number on day one is the number on the invoice, and any change order is priced and approved in writing before the work continues. Call (844) 320-5939 to get your written price.
Yes. Permits for structural, electrical, and plumbing work are required by the City of Irving and are pulled and inspected as part of the project. A bid that leaves permits out isn’t a complete bid. Call (844) 320-5939 with questions about permitting.
A bathroom runs three to five weeks, a kitchen six to ten weeks, and a full interior remodel three to five months depending on scope and material lead times. Call (844) 320-5939 for a schedule built around your project.
Written by the team at Penhallow Remodeling Irving.
Need Construction Help?
Call Penhallow Remodeling Irving - licensed & insured, here with fast after-hours help in Irving.
(844) 320-5939