







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat backsplash installation costs in Irving, TX (and why the wall behind your range matters more than the tile)
Backsplash installation in Irving runs $800 to $2,500 for most kitchens, with material and prep driving the number. Call (844) 320-5939 for a written price before any work starts. If your Irving home was built before 1995, the wall behind your range is almost certainly standard drywall, and no tile installer worth hiring will set stone or ceramic directly on it. That backer-board swap is where backsplash budgets quietly blow past the quote, and it’s the piece almost every online calculator leaves out.
Key Takeaways
- Full installed backsplash jobs in Irving land at $800-$2,500, including backer-board prep.
- Swapping drywall for cement board behind the range adds $150-$400 and isn’t optional.
- Per-square-foot installed cost runs about $18-$45 depending on tile choice.
- Our written quote names the exact backer material and grout type, so you’re comparing the same scope.

Why the wall behind your range is the real cost driver
Most of Irving’s housing stock is 1970s and 1980s brick ranch tract housing – Valley Ranch and south Irving especially – built when standard drywall was the default behind a kitchen counter. Drywall wasn’t designed to hold thinset and tile, and it isn’t waterproof. Near a range producing steam and grease, that becomes a slow failure: the tile looks fine for a year, then a grout line cracks, a piece pops, and the sheet behind it has been quietly swelling the whole time.
The fix is a moisture-rated backer board. In plain terms, that’s the layer between your drywall and your tile – the substrate. We use cement board or a comparable moisture-rated panel, screwed to the studs and sealed at the seams, so the tile has something solid and water-resistant to grab. It’s the difference between a backsplash that lasts and one that cracks again six weeks after the crew leaves.
What does that swap cost? Typically $150-$400, and it depends on how much of the wall has to come out. A short run behind a slide-in range is at the low end. A wall where the drywall has already softened near the sink is at the high end. When we quote a backsplash, that number is baked into the range below – not tacked on after demo day.
Backsplash installation cost by tile type in Irving
These installed ranges include backer-board prep, mortar, adhesive and trim, so you’re looking at the full job rather than just the tile and labor:
| Material | Installed cost (per sq ft) | Best fit |
|---|---|---|
| Subway tile (ceramic) | $18-$28 | Classic kitchens, tight budgets, quick install |
| Mosaic (glass or stone) | $28-$40 | Sheet-mounted, faster layout, lots of grout lines |
| Large-format porcelain or stone | $30-$45 | Modern look, fewer seams, needs flatter substrate |
A typical Irving backsplash covers 30 to 45 square feet, which is how a $20-per-square-foot subway job lands near $700-$1,200 while a large-format stone run with a lot of cuts climbs toward the $2,500 ceiling. If your Kitchen Remodeling is already underway, backsplash timing is worth coordinating with the cabinet install – tile set after cabinets go in means fewer cuts and a cleaner line.
Grout choice matters here too. Indoors in North Texas you’re not fighting the freeze-thaw cycle the way exterior work does, but the cooking-heat cycle near a range does a number on sanded grout. We recommend epoxy grout for the range surround because it resists heat, grease and staining far better than sanded, and it doesn’t need sealing. It’s a modest upcharge most homeowners are glad they paid a year later.

What to look for when you compare backsplash bids
Two quotes for the same counter can differ by $600 and still be for the same tile – because one is setting tile on your existing drywall and the other is replacing the substrate. The way to compare fairly is to ask what’s written down. Here’s what every backsplash quote should specify before you sign anything:
- Backer material by name – cement board or a moisture-rated panel, not “prep as needed.”
- Grout type – epoxy versus sanded, and where each is used.
- Trim and edge detail – how the tile terminates at the counter and cabinet, and what material.
- Removal and disposal of the old material, if any.
- The guarantee in writing – what’s covered and for how long.
Penhallow Remodeling Irving puts all five on the page before a single tile is set. Under the Kingswell standard, every job gets a written price up front, a real arrival window, and a 365-Day Done Right Promise – if tile pops, grout cracks, or edge trim separates within that year, we come back and fix it at no charge. Most tile installers hand you a verbal number and no guarantee at all, which is worth weighing when the bids look close. Our technicians have up to 22 years of experience, arrive background-checked and in uniform, and a live person answers the phone around the clock.
Materials matter to the layers of protection, too. When a backsplash rolls into a broader kitchen project, we install recognized lines like Cambria quartz and Silestone countertops alongside KraftMaid and Wellborn cabinetry, each carrying its own manufacturer warranty that stacks with ours. Those are the surfaces your backsplash meets, and there’s no point guaranteeing the tile if the counter underneath is going to shift. See how it fits into a full home remodel if you’re weighing several rooms at once.
How the full Irving kitchen budget breaks down
If the backsplash is one piece of a larger kitchen project, it helps to see the whole picture. A full kitchen remodel in Irving typically runs $14,000-$45,000, and the backsplash is the smallest line on the sheet. Here’s how the pieces stack:
| Kitchen line item | Typical Irving range |
|---|---|
| Full kitchen remodel | $14,000-$45,000 |
| Small kitchen remodel | $9,000-$20,000 |
| Cabinet installation | $4,000-$13,000 |
| Countertop installation | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Kitchen island installation | $3,000-$10,000 |
One local note that affects kitchen work more than most homeowners expect: Irving sits under the DFW Airport flight path, and much of the city falls inside noise and height-restricted zones. None of that touches a backsplash, but if your kitchen project grows into an addition or a second-story bump-out, the FAA 7460-1 review and city coordination can add real time to the front end. Better to know that before demo, not after.
Frequently asked questions
Most Irving backsplash jobs run $800-$2,500 installed, with the number driven by tile choice, wall length, and whether the drywall behind the range has to be replaced with cement board. At roughly $18-$45 per square foot installed including prep, a typical 30 to 45-square-foot kitchen lands in the middle of that range. Call (844) 320-5939 for an exact written quote – estimates are free.
Replacement usually wins once you’ve had more than one tile pop or a grout line that keeps cracking, because repeated failures signal the substrate is the problem, not the surface. A single cracked tile can often be swapped for a small repair, but if the drywall behind it has swelled, patching the tile alone just kicks the failure down the road. A written quote will tell you which situation you’re in.
In most pre-1995 Irving homes, yes – the drywall behind the range was never designed to hold tile or handle steam and grease. Standard drywall isn’t waterproof, so tile set directly on it tends to crack and lift within a year or two. Replacing it with cement board or a moisture-rated backer adds $150-$400, and skipping it is the single most common reason a backsplash fails early.
Most standard backsplash runs are a one-day install, assuming the walls are sound and materials are on site – epoxy grout may push it into a second day for cure time. If the backer board has to be replaced, add a day for prep and drying. Call (844) 320-5939 to talk through your timeline and lock an arrival window.
Get a written backsplash price before the tile goes up
Compare us against any bid. We’ll name the backer material, the grout type, and the trim, and we’ll stand behind it in writing for a full year under the 365-Day Done Right Promise. Free estimates, upfront pricing, and a real person on the line at (844) 320-5939 whenever you’re ready. Call today and let’s price your Irving backsplash properly – the whole job, not just the tile.
Written by the team at Penhallow Remodeling Irving, serving Irving, TX.
What Our Customers Say
"We'd been burned by a contractor before who disappeared halfway. Penhallow finished on time and stood behind everything. The written price gave me peace of mind the whole way."
- Simone Clarke"Good remodel of two bathrooms. A fixture came in wrong and added a few days, but they ate the cost of fixing it. Finish work is excellent and they cleaned up daily."
- Rudy Mackey"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike












