







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Kitchen Remodeling in Irving: What to Know First
Silestone kitchen remodeling in Irving typically runs $14,000 – $45,000 for a full remodel, and most jobs we quote land in the $18,000 – $30,000 range once you settle cabinet line and layout. A small or partial remodel involving countertop and backsplash work usually falls between $9,000 and $20,000. We’re an independent Silestone service provider: Penhallow Remodeling Irving installs, replaces and builds kitchens around Silestone quartz, but we are not affiliated with or authorized by the Silestone brand.
This page is for Irving homeowners who already have Silestone in the kitchen (or plan to put it there) and want the job done right the first time – no verbal ballpark that grows after demo day. Our technicians have up to 22 years of experience, and every project starts with a written price. Call (844) 320-5939 for a free estimate.
Key Takeaways
- Full Silestone kitchen remodels in Irving: $14,000 – $45,000; countertop-only swaps: $2,000 – $6,500.
- Silestone is a quartz surface, and quartz has failure modes that differ from granite and from porcelain slab.
- Every job gets a written price before work starts and our 365-Day Done Right Promise in writing.
- A live person answers the phone around the clock – no voicemail prompt.
- Estimates are free. Call (844) 320-5939.
How Silestone Products Fail – and How We Fix Them
Silestone is engineered quartz: roughly 90% ground quartz bonded with polyester resin, pigments and, in some lines, antimicrobial additives. That resin binder is why quartz behaves differently from natural stone in a Texas kitchen. Here are the failure patterns we see most in Irving, and what we do about each.
- Thermal shock cracking near the range or oven (most common in the Calacatta and Eternal series). Quartz resin expands and contracts at a different rate than the quartz aggregate. A hot pan set directly on the surface, or a slow, repeated heat cycle from an oven venting into the counter, can leave a hairline crack that starts at the cooktop cutout corner. We relieve the stress by re-routing the opening with a radiused corner (a rounded inside corner, not a sharp 90-degree one) and re-setting the slab on a proper substrate so the edge floats rather than binds.
- Seam shadowing and adhesive yellowing on light-color slabs. Silestone’s white and off-white lines – Blanco, the Iconic White series – show seams wherever a two-slab run meets. Over several summers of attic-heat cycling, the factory-approved adhesive can amber. We match seam adhesive by slab batch and, where the run allows, reposition seams out of the main sight line and under the sink or behind the cooktop.
- Edge chipping at sink cutouts and dishwasher openings. Quartz is hard but not tough at a thin edge. Undermount sink reveals and the underside of an overhang are where it chips. We ease and polish edges to a full profile and back the reveal with a hardwood cleat so the slab isn’t carrying the sink’s weight on a bare edge.
- Discoloration from surface staining in older resin formulations. Coffee, red wine, turmeric and cooking oils can leave a faint ghost on older matte or low-sheen finishes, particularly on the lighter shades. Before we call a slab a loss, we test-spot a corner with a manufacturer-appropriate cleaner. About half the time what looks permanent comes up with the right product and patience; the rest gets replaced as part of the remodel.
- Backsplash and countertop joint separation in Irving’s climate. DFW’s seasonal swing from near-freezing winter mornings to 100-plus summer afternoons works on the caulk joint between Silestone and a tile or slab backsplash. A rigid grout joint there cracks; a properly spec’d flexible caulk joint doesn’t. We run flexible sealant, not grout, on that transition every time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Silestone Kitchen Remodeling Process
Here’s how a Silestone job runs from your first call to cleanup day.
- 1
Free on-site estimate. We measure the kitchen, look at your existing Silestone or the slab you’re considering, and walk the layout with you. You get a written price before anyone picks up a tool – not a range, a number.
- 2
Diagnosis and layout decision. We identify what’s failing and why (heat, seam, edge, substrate), then decide whether the existing slab can be salvaged, repaired on site, or needs replacement. That call drives the rest of the number.
- 3
Cabinet and material selection. Cabinets come from KraftMaid or Wellborn; countertops from Silestone, Cambria or Caesarstone. We install to the slab manufacturer’s warranty requirements – the right substrate, the right adhesive, the right support – so the countertop warranty stays intact.
- 4
Demo and rebuild. Cabinets pulled, substrate set, cabinets installed and leveled, then the Silestone goes down. Background-checked, uniformed technicians do the work, and we keep the work zone contained from the rest of the house.
- 5
Seams, edges and finish work. Seam adhesive matched to the slab, edges eased and polished, backsplash set with a flexible joint at the counter.
- 6
Walkthrough and cleanup. We demo the finished kitchen, walk you through what was done, and hand over the written guarantee – the 365-Day Done Right Promise, in writing, with a free return visit if anything fails inside that window.
What Silestone Kitchen Remodeling Costs in Irving

Your final number depends on three things: how much layout changes, which cabinet line you pick, and whether your Silestone slab is staying or going. Honest ranges for the Irving market:
- Full Silestone kitchen remodel: $14,000 – $45,000
- Small or partial kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Silestone countertop installation or replacement: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What moves the number up: moving the sink or range (new plumbing and gas/electrical), a full cabinet tear-out versus refacing, larger slab runs with more seams, and a premium Silestone line over a standard one. What moves it down: keeping your existing cabinet layout and swapping only the counter and backsplash. Estimates are free and the written price you get is the price on the invoice. Call (844) 320-5939 to schedule yours.
See the difference
Before
After
Before
After
Before
AfterWhy Irving Homeowners Call Penhallow Remodeling Irving for Silestone Work
Most people who call us have already been through one contractor who never showed, or a price that ballooned the week after demo. That’s why the written price comes first, before work starts, and why the 365-Day Done Right Promise is printed on every job. If something fails inside that year, we come back and fix it at no charge – and if a repair doesn’t hold, the return visit is free, no service-call fee.
Our technicians have up to 22 years of experience with quartz and cabinetry, they’re background-checked, and they arrive in uniform. We work with Silestone alongside KraftMaid, Cambria, Kohler and Toto, so the products behind the promise are as solid as the promise. A live person answers the phone around the clock, every day. Penhallow Remodeling Irving operates under The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
FAQs

Not if the installation meets the manufacturer’s requirements. Silestone’s warranty covers the slab itself and depends on proper fabrication, support and installation. We install to those specs, so the slab warranty stays in force alongside our own written guarantee. Call (844) 320-5939 and we’ll walk you through what the warranty does and doesn’t cover before you decide.
Sometimes a crack can be repaired and sometimes it can’t – it depends on where it’s located and whether the slab has lost structural support underneath. A hairline surface crack at a cutout corner is often repairable; a crack running across the slab usually means replacement. We’ll tell you honestly at the free estimate which one you’re looking at. Call (844) 320-5939 to book it.
A countertop-and-backsplash swap typically takes a few days; a full kitchen remodel with new cabinets and Silestone runs several weeks depending on cabinet lead time and scope. We give you a defined arrival window and a written timeline up front. Call (844) 320-5939 for a project-specific timeline and price.
Yes – where permits are required for the scope (plumbing, electrical, structural), we handle them. The written price includes permit costs so there are no surprise add-ons later. Call (844) 320-5939 to talk through your project’s permit needs.
We come back and make it right at no charge. That’s the 365-Day Done Right Promise, and it’s in writing on every job. If a repair fails, the return visit is free – no service call, no re-inspection fee. Questions before you commit? Call (844) 320-5939; estimates are free.
Get Your Free Silestone Kitchen Estimate in Irving
If you have a Silestone kitchen that’s cracking, staining, or ready for an update, call (844) 320-5939 for a free estimate. You’ll get a written price before work starts, a real arrival window, background-checked uniformed technicians, and the 365-Day Done Right Promise in writing. A live person answers 24/7 – no voicemail, no callback window. Let’s get the number on paper first, then we build the kitchen.
Written by the team at Penhallow Remodeling Irving, serving Irving and nearby areas.












