







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Cabinet Installation Costs in Irving, TX - and Why the Walls Matter More Than the Price
Cabinet installation in Irving typically runs $4,000-$13,000 for a full kitchen when you include new semi-custom cabinets, and the number that surprises homeowners is rarely the cabinet line itself. It’s the leveling, shimming, and scribe work that Irving’s clay soil makes unavoidable. If your kitchen sits on a 1970s slab-on-grade ranch foundation, the walls and floor have been moving for decades, and cabinets hung without correcting for that will gap and bind within a season. Penhallow Remodeling Irving puts the wall prep and the cabinet price in one written number before work starts. Call (844) 320-5939 for a free estimate.
Key Takeaways
- Labor-only cabinet installation in the DFW market runs $1,500-$3,500 for a full kitchen of 15-22 linear feet.
- With new KraftMaid or Wellborn semi-custom cabinets included, total installed cost lands between $8,000 and $22,000 depending on door style and finish.
- Clay-soil wall and floor correction can add 15-25% to a flat installation quote, and box-store installers rarely disclose it upfront.
- A straight cabinet swap usually needs no Irving permit. Adding a dishwasher circuit, moving a sink, or pulling a soffit does.

Why Irving Kitchens Cost More to Reinstall Than the National Average
North Texas clay does not sit still. It swells in a wet spring and shrinks through a 100°F summer, and every cycle nudges the slab under an older Irving ranch home a little further from where it started. After forty years of that, a floor that slopes a quarter inch over ten feet is ordinary, not alarming. Walls go out of plumb in the same slow drift.
What that means for cabinets is simple. A stock cabinet screwed to a crooked wall will show a gap at the crown, bind at the door, and pull away from the countertop. A professional installation corrects for the substrate first: laser-leveling the base run, shimming low corners, scribing filler strips to the wall contour, and adding scribe molding where the cabinet meets an uneven surface. That work is real labor, and it is the line item a $2,000 flat-rate installation ad never mentions.
Expect it to add 15-25% to a quote that assumed square walls. On an Irving kitchen, assume the correction is part of the job and price it in from the beginning. That’s how Penhallow Remodeling Irving builds estimates for homes in south Irving and the older post-war blocks near downtown, where the slab has had the longest to move.
What Should You Look For in a Cabinet Installation Quote?
Read the quote for what it does not say. The cheapest bid on an Irving kitchen is usually cheap because it assumes the walls are straight and the floor is flat, and you will meet the difference after demo day when the crew discovers it isn’t.
Look for these five things in writing:
- Leveling and shimming listed as included. If it isn’t in the scope, it becomes a change order.
- Scribe molding and filler strips called out. These are how cabinets meet an out-of-plumb wall without a visible gap.
- Wall prep and any drywall repair named. Old cabinets often hide rot or a soft patch behind them.
- The cabinet brand and door style spelled out. KraftMaid and Wellborn ship as modular sections with precise measurements, and they need an installer who measures the room, not the catalog.
- A written price, not a range. A range is a promise to renegotiate. A number is a number.
Penhallow Remodeling Irving works under the Kingswell standard: say the price before the work, show up in the arrival window we gave, and leave the site cleaner than we found it. Every project gets a written price before a single cabinet comes off the wall, and the 365-Day Done Right Promise means if something fails within the year, we come back and fix it at no charge. Background-checked technicians arrive in uniform, and a real person answers the phone around the clock.

What Drives the Cabinet Installation Cost in Irving?
Three things move the number: cabinet grade, kitchen size, and how much correction the room needs. Semi-custom lines like KraftMaid and Wellborn cost more than stock, and they’re worth the difference in a working kitchen. Their dovetail drawer boxes hold up to daily use, full-extension glides let you reach the back of a deep drawer, and adjustable hinges let the installer fine-tune door alignment as the seasons shift the house. Those features only pay off when the installer knows how to set them, which is why brand and installer skill travel together.
Kitchen size matters less than layout. A galley of 15 linear feet in a Valley Ranch ranch home prices differently than an L-shaped kitchen with an island and a pantry run. Cabinet installation is also part of the larger scope of Kitchen Remodeling, and a full kitchen remodel in Irving runs $14,000-$45,000 once countertops, backsplash, and fixtures are folded in.
Cabinet Installation Pricing for Irving Kitchens
| Item | Typical Cost Range |
|---|---|
| Cabinet installation (labor only, 15-22 linear ft) | $1,500-$3,500 |
| Cabinet installation (cabinets + labor, semi-custom) | $8,000-$22,000 |
| Full cabinet installation (site-specific total) | $4,000-$13,000 |
| Countertop installation (Silestone, Caesarstone) | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Kitchen island installation | $3,000-$10,000 |
The $4,000-$13,000 range is the number to plan against for a typical Irving installation. It sits under the full kitchen remodel range because it covers cabinets alone, not the whole room. If your project pairs new cabinets with a Silestone or Caesarstone top and a tiled backsplash, ask for the combined number so nothing arrives as a surprise later.
Does Installing Cabinets in Irving Require a Permit?
A straight cabinet swap, with no electrical, plumbing, or structural changes, usually does not need a permit in Irving. The moment the job adds a dishwasher circuit, relocates a sink, or removes a soffit, a permit is required, and a soffit is the one that catches homeowners off guard. Those boxed-in sections above the upper cabinets sometimes hide a duct, and removing one without checking means a surprise mid-install.
This is where the general contractor’s role matters. Our job is to know where the line sits and to pull the permit when the scope crosses it, not to leave that judgment to a tradesperson who only sees one part of the room. Irving’s construction environment adds its own layer too: much of the city sits inside the DFW Airport noise contour and height-restricted zone, and tall structures near the flight paths can trigger FAA 7460-1 review. That rarely touches a cabinet job, but it does affect additions and second stories that grow out of a kitchen plan, and it’s worth knowing before a design gets drawn.
FAQs
Cabinet installation in Irving typically costs $4,000-$13,000 for a full kitchen with new semi-custom cabinets included. Labor-only installation runs $1,500-$3,500 for 15-22 linear feet, and a complete installed set with KraftMaid or Wellborn cabinetry lands between $8,000 and $22,000 depending on door style and finish. Call (844) 320-5939 for an exact quote. Estimates are free.
Because the walls and floor have moved. Decades of North Texas clay swelling and shrinking leave slab-on-grade homes in Irving with out-of-plumb walls and floors that slope a quarter inch over ten feet. Correcting for that takes laser leveling, shimming, and scribe molding, which adds 15-25% to a flat installation quote. That correction is included in a Penhallow written price from day one, so it never shows up as a surprise line item after demo. Call (844) 320-5939 to talk through your kitchen.
Refacing is cheaper, but it only makes sense when the cabinet boxes are solid and square. In many Irving ranch kitchens, the boxes have absorbed the same clay movement the walls did, and new doors on a racked frame will hang unevenly. New semi-custom cabinets from KraftMaid or Wellborn give you dovetail drawer boxes, full-extension glides, and adjustable hinges that refacing can’t add. Call (844) 320-5939 and we’ll tell you honestly which path your kitchen supports.
Usually yes, if it’s a straight swap with no electrical, plumbing, or structural changes. Adding a dishwasher circuit, moving a sink, or removing a soffit that conceals a duct does require a permit in Irving, and the general contractor on the job should be the one who recognizes that line. Call (844) 320-5939 and we’ll tell you which side of it your project falls on.
Penhallow Remodeling Irving installs cabinets the way a room actually sits, not the way a flat-rate quote assumes it does. If you want a written number that covers the cabinets, the leveling, and the wall prep in one figure, call (844) 320-5939 today. A live person answers around the clock, the estimate is free, and every quote comes with the 365-Day Done Right Promise in writing. To see how cabinets fit into the larger project, start with our home page and our Kitchen Remodeling in Irving service.
Written by the team at Penhallow Remodeling Irving, serving Irving, TX.
What Our Customers Say
"We'd been burned by a contractor before who disappeared halfway. Penhallow finished on time and stood behind everything. The written price gave me peace of mind the whole way."
- Simone Clarke"Good remodel of two bathrooms. A fixture came in wrong and added a few days, but they ate the cost of fixing it. Finish work is excellent and they cleaned up daily."
- Rudy Mackey"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike












