







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Cabinet Refacing Costs in Irving, TX – and Why Your Box Material Decides the Number
Refacing kitchen cabinets in Irving typically runs $3,200 to $8,500 for a standard 20- to 25-door kitchen, covering new doors, drawer fronts, veneer on the exposed box faces, and hardware. The honest answer is wider than that, though: if your boxes were built between 1978 and 1992 in a Valley Ranch or south Irving tract, there’s a real chance they’re pressed-wood composite rather than solid wood – and that single fact can turn refacing from a smart investment into a three-year mistake. Call (844) 320-5939 for a free written price before you commit to anything.

Why Box Construction Comes Before Any Price in Irving
Most refacing quotes start with door style and finish. That’s backwards. The box – the carcass behind the doors – is what the new veneer actually adheres to, and in Irving’s older subdivisions the box material is the variable that decides whether the job holds up or peels.
Here’s the split you’ll find across Irving’s housing stock. The 1970s-80s brick ranch tract homes around Valley Ranch and south Irving were built fast, and a meaningful share used MDF or particleboard boxes with a melamine or paper skin. Solid-wood boxes show up more in custom builds and in some of the post-war housing near downtown Irving. Las Colinas is a different story entirely – mostly multifamily and high-rise, where cabinet work is a commercial tenant build-out rather than a homeowner refacing decision.
How to Check Your Own Boxes Before You Call Anyone
You can identify box construction in about five minutes without a single tool. Do this before a contractor walks in, so you know what you’re dealing with.
- Open a lower cabinet and look at the inside floor edge where it meets the side. Solid wood shows grain and a continuous edge. Composite shows a uniform, speckled or dusty-brown core, sometimes with a thin manufactured skin peeling at a corner.
- Look under a sink base cabinet. This is where water damage tells the truth first. Swollen, crumbly edges in composite boxes are common here, and veneer won’t bond cleanly to a swollen substrate.
- Check the shelf pin holes. Solid wood holds a crisp, clean hole. Particleboard crumbles slightly at the rim and the holes often look fuzzy.
- Tap a side panel with a knuckle. A dull, dead thud usually means composite. A sharper, ringing tone usually means solid wood or plywood.
- Pull a drawer and inspect the box behind it. Drawer boxes are the most reliable tell – they’re rarely disguised with a decorative skin.
Why 100°F North Texas Heat Punishes Veneer on Composite Boxes
Veneer adhesive has a temperature ceiling, and Irving spends July and August above it. Attic temperatures in a slab-on-grade Irving home routinely climb past 140°F, and cabinets mounted on exterior walls run hot against the inside face. When the adhesive on a composite substrate cures and re-cures through that cycle, the bond weakens. The veneer lifts at corners first, then along seams.
Solid-wood boxes move with the heat. Composite boxes don’t move the same way – the skin and the core expand at different rates, and the veneer sits on the losing side of that argument. We’ve opened cabinets where the previous refacing job was three summers old and the veneer was already waving.
This is why our written price states which box condition triggers which scope before the crew touches anything. If we open a cabinet and find composite with water swelling, the number on day one should already have accounted for it, or you should know before the job starts that the scope changes. No mid-project “we found composite, so it’s extra” conversation. That’s the Kingswell standard: say the price before the work.

What Refacing vs. Replacement Actually Costs in Irving
Here’s where the math gets clear. Refacing is a value move when your boxes are solid and square. When they’re composite and failing, it’s a patch on a problem that outlives the patch. These Irving ranges reflect current market material and labor.
| Item | Low | High |
|---|---|---|
| Cabinet installation (full replacement, new boxes and doors) | $4,000 | $13,000 |
| Countertop installation | $2,000 | $6,500 |
| Backsplash installation | $800 | $2,500 |
| Kitchen island installation | $3,000 | $10,000 |
| Small kitchen remodel (full scope) | $9,000 | $20,000 |
| Full kitchen remodel | $14,000 | $45,000 |
The threshold point: on a solid-wood box, refacing stays the better 10-year value in most Irving homes, even when you pair it with a new countertop and backsplash. On a composite box with any water swelling, replacement with a KraftMaid or Wellborn box usually costs the same or modestly more up front and lasts decades longer. KraftMaid and Wellborn both carry their own manufacturer warranties that stack alongside ours – two layers of protection behind the same cabinet.
If you’re weighing the full scope, our Kitchen Remodeling page walks through what a complete tear-out-and-replace involves.
What the 365-Day Done Right Promise Covers on a Refacing Job
The guarantee matters most on refacing because refacing failures are the kind a contractor can vanish on. Our 365-Day Done Right Promise covers the specific failures that come back a year later:
- Veneer lifting at corners, seams and edges
- Door hinge failure – sagging, stripped screws, misalignment
- Drawer-front alignment that drifts after the seasonal heat and cool cycles
If any of it fails inside 12 months, we come back and fix it at no charge. The written guarantee comes with every job, not just the big ones. We install Cambria quartz, Silestone and Caesarstone countertops with the same structure – the manufacturer’s warranty and ours both apply. Our technicians have up to 22 years of experience, they’re background-checked, and they arrive in uniform. A live person answers the phone 24/7, so you’re not leaving a voicemail when something needs a look.
For the larger picture of how Irving’s remodel market is structured – the infill and redevelopment around Las Colinas, the FAA notification rules that shape what can be built near the airport flight paths – the home page covers the ground we work on.
FAQs
Cabinet refacing in Irving typically runs $3,200 to $8,500 for a standard kitchen, depending on door count, door style and whether the boxes need prep before veneer. Call (844) 320-5939 for a written price – estimates are free and we give you the number before any work starts.
Refacing is cheaper on solid-wood boxes, often by half or more. On composite boxes with swelling or delamination, replacement with new KraftMaid or Wellborn boxes is the better 10-year value because refacing on a failing substrate will need to be redone. Call (844) 320-5939 and we’ll tell you honestly which side of that line your kitchen sits on.
Sometimes, but only if the composite is dry, structurally sound and hasn’t swollen – and even then, North Texas heat shortens the veneer’s life. The inspect-first step matters here. Call (844) 320-5939 for a free assessment before you sign anything.
Most refacing jobs run three to five working days, and the crew is on site for the full window we give you – no showing up a week late, no disappearing between visits. Call (844) 320-5939 to schedule a written estimate visit.
Get a Written Price Before You Commit
Refacing can be the smartest move in your kitchen – or a three-year mistake – and the difference is the box hiding behind your doors. We’ll inspect it, tell you which it is, and put the number in writing before anyone touches a screwdriver. Call Penhallow Remodeling Irving at (844) 320-5939 for a free estimate.
Written by the team at Penhallow Remodeling Irving, serving Irving, TX.
What Our Customers Say
"We'd been burned by a contractor before who disappeared halfway. Penhallow finished on time and stood behind everything. The written price gave me peace of mind the whole way."
- Simone Clarke"Good remodel of two bathrooms. A fixture came in wrong and added a few days, but they ate the cost of fixing it. Finish work is excellent and they cleaned up daily."
- Rudy Mackey"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike












