







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat a Tub-to-Shower Conversion Costs in Irving, TX (And What Hides Behind the Wall)
Tub-to-shower conversions in Irving typically run $3,500 to $10,000, and the wide spread comes down to one thing: whether the plumbing behind the wall is worth tying into. In an Irving home built before 1985, the tub you’re converting almost certainly drains into a cast-iron stack and feeds from galvanized supply lines. Open that wall without scoping what’s inside and you may finish the tile before discovering the drain line is 70% occluded, and now you’re tearing back out. Call Penhallow Remodeling Irving at (844) 320-5939 for a written price before demo ever starts.
Key Takeaways
- Most Irving tub-to-shower conversions land between $3,500 and $10,000; a full bathroom remodel that includes the conversion runs $9,000 to $28,000.
- The hidden variable is plumbing condition in pre-1985 homes, especially galvanized supply lines and cast-iron drain stacks that corrode from the inside.
- Irving requires a permit and inspection covering drain slope, waterproofing membrane, and rough plumbing. Skipping it flags on resale.
- Every Penhallow job carries the 365-Day Done Right Promise in writing, covering the membrane and drain workmanship.

Why Irving’s Older Housing Stock Changes the Number
Irving is a built-out inner-ring suburb. Most of what we do here is tear-out-and-replace rather than new construction, and that matters for a conversion. In the 1970s-80s brick ranch tract homes across Valley Ranch and south Irving, the plumbing was built to a standard that made sense in 1978 and doesn’t hold up under a half-century of North Texas clay movement and hard water.
Galvanized steel supply lines rust from the inside out. You don’t see a leak, you see pressure that fades the longer the shower runs, and a shower head that dribbles when the washing machine kicks on. Cast-iron drain stacks are worse: a 4-inch pipe can scale down to an inch and a half of clear passage and still look fine from the fitting. When we open a wall for a tub-to-shower conversion in an Irving ranch, the supply and drain run is the first thing we scope, before we pick tile.
A tub-to-shower scope that ignores existing plumbing condition is an incomplete scope. It’s not a technicality. It’s the difference between a $4,000 conversion and a job that hits a mid-project change order that nobody wrote down.
What We Look For Behind the Wall Before Demo
Here’s what keeps the number honest on a Penhallow conversion:
- Supply line condition. Galvanized pipe gets scoped and pressure-tested. If it’s restricted, we present replacement as part of the written price, not a surprise later.
- Drain stack integrity. A camera scope of the cast-iron stack shows occlusion before the floor is opened. If the stack is too far gone to tie into, you’ll see the contingency number in writing up front.
- Moisture and mold at the exterior wall. Irving’s spring hail and windstorms drive water into exterior walls, and it settles as hidden mold behind the old tub surround. A conversion is the right moment to address it, before a waterproof membrane seals over a contaminated substrate.
- Substrate and waterproofing. We install cement board substrate (the moisture-resistant layer behind your tile) with a bonded waterproof membrane over the wet floor and walls. That’s what the inspection checks.
- Permit and inspection. Irving requires one for a tub-to-shower conversion, and the inspection covers drain slope, waterproofing membrane, and rough plumbing. Contractors who skip it leave you with an unpermitted bathroom that flags at resale.
Ask any contractor what happens if the plumbing behind the wall is non-serviceable. If they don’t hand you the answer in writing before demo, you’re the one holding the change order. That’s the standard behind The Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.

Tub-to-Shower Conversion Cost Breakdown for Irving
Here’s what the line items actually look like. These are real ranges for the Irving market, not a teaser number that grows after the truck rolls.
| Item | Typical Range |
|---|---|
| Tub-to-shower conversion (standard alcove, plumbing in good condition) | $3,500 - $10,000 |
| Shower replacement (existing shower footprint) | $3,000 - $8,500 |
| Walk-in shower installation (curbless or benched) | $4,500 - $12,000 |
| Full bathroom remodel that includes the conversion | $9,000 - $28,000 |
| Bathroom vanity installation (if it’s part of the scope) | $800 - $3,000 |
What moves the conversion number inside that $3,500 to $10,000 band? Four things: whether the drain stack is re-routed, whether supply lines get replaced, the size and finish of the shower enclosure, and whether we’re pulling a permit for a code-level rough-in change or just a finish swap. Tile choice and fixture grade (Kohler and Moen are our standard brands) matter, but they move the price less than the pipe does. If that scope pulls in the vanity, floor, and lighting, you’re looking at a Bathroom Remodeling scope, and the written price reflects that before we touch a hammer.
We put every one of those contingencies in the written price before work starts. The number on day one is the number on the invoice, unless a hidden problem forces a scope change, and then you see it in writing before we proceed.
What the 365-Day Done Right Promise Covers on a Conversion
The two failure points that cause water damage inside walls are the waterproofing membrane and the drain installation. That’s exactly what our 365-Day Done Right Promise backs in writing on every conversion. If either fails inside that year, we come back and make it right at no charge. A free second visit if a repair fails, no service call, no re-inspection fee. Ask any contractor you’re considering for the same thing in writing, and read the exclusions clause before you sign.
Our technicians have up to 22 years of experience and arrive background-checked and in uniform, so you know who’s inside your home on demo day. Crews working here juggle both the slab-on-grade subdivision remodels in Valley Ranch and older post-war housing near downtown, and that experience changes what we plan for before the first tile is set. If a project also touches cabinetry or countertop work, a name like home improvement remodeling often comes up, and we can fold it into the same written price.
Questions Irving Homeowners Ask Before Booking
How much does a tub-to-shower conversion cost in Irving?
A standard alcove conversion runs $3,500 to $10,000; a full bathroom remodel that includes the conversion runs $9,000 to $28,000. Call (844) 320-5939 for an exact quote, and the estimate is free.
Is it cheaper to repair the tub or convert it to a shower?
Conversion usually wins in Irving’s pre-1985 homes. A failing cast-iron drain or restricted galvanized line won’t improve by patching the tub, and replacing a tub surround inside a rotting substrate only buys a year or two. Call us for a written price comparison.
Can you do the conversion in one visit, or does it take days?
A conversion takes multiple days, not one, and that’s the honest answer. Demo, rough plumbing, and inspection happen in stages, and the tile and membrane need cure time. We give you a real arrival window on each stage, not a vague “sometime this week.” Call (844) 320-5939 to schedule a walkthrough.
Do I need a permit for a tub-to-shower conversion in Irving?
Yes, Irving requires a permit and inspection for a tub-to-shower conversion, covering drain slope, waterproofing membrane, and rough plumbing. We pull the permit as part of the job. When it’s done, you have a bathroom that passes inspection and doesn’t flag on resale.
Get a Written Price Before Demo Day
Before you commit to a tub-to-shower conversion, get a number in writing that accounts for what’s actually behind the wall. A live person answers our phone around the clock, not an answering service. Call Penhallow Remodeling Irving at (844) 320-5939 for a free estimate and a written price you can hold us to, backed by the 365-Day Done Right Promise.
Frequently Asked Questions
A standard conversion runs $3,500 to $10,000, and a full bathroom remodel including the conversion runs $9,000 to $28,000. The spread comes down to plumbing condition behind the wall, not tile choice. Call (844) 320-5939 for an exact quote.
Galvanized supply lines and a corroded cast-iron drain stack are the two big ones. If the stack is occluded or the supplies are restricted, replacing them before the shower closes up adds to the number, and we show you that contingency in writing before demo.
It can. Irving’s spring hail and wind events drive exterior moisture intrusion that shows up as hidden mold behind old tub surrounds. A conversion is the right moment to inspect and address it before the membrane goes over a contaminated substrate.
The 365-Day Done Right Promise covers the waterproofing membrane and drain workmanship, plus a free return visit if a repair fails. It’s in writing on every project.
Written by the team at Penhallow Remodeling Irving, serving Irving, TX.
What Our Customers Say
"We'd been burned by a contractor before who disappeared halfway. Penhallow finished on time and stood behind everything. The written price gave me peace of mind the whole way."
- Simone Clarke"Good remodel of two bathrooms. A fixture came in wrong and added a few days, but they ate the cost of fixing it. Finish work is excellent and they cleaned up daily."
- Rudy Mackey"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike












