







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterDo You Need a Permit to Remodel a Kitchen in Irving, TX? Yes, If You Touch These Four Things
In Irving, TX, you need a permit if your kitchen remodel adds or moves electrical circuits, relocates plumbing, changes a structural wall, or modifies a window. Cosmetic work like paint, new flooring, or a countertop swap over existing cabinets usually doesn’t require one. The City of Irving Development Services office is the authority that decides, not your contractor. Call us at (844) 320-5939 for a free estimate and we’ll tell you exactly which permits your Irving project needs before anyone picks up a tool.
That’s the short answer, and it’s accurate. But in Irving the question has a second layer most general guides skip – one we deal with regularly on kitchen jobs around Las Colinas and the older streets near downtown. If your kitchen shares a wall with an addition, a garage conversion, or any prior work that went through an overlay district, the permit conversation gets longer. More on that below.
Key takeaways
- Electrical, plumbing, structural, and window changes need a permit in Irving. Paint and appliances don’t.
- Las Colinas overlay districts and airport-adjacent zoning add coordination steps on some interior jobs, especially when venting or frames touch an exterior wall.
- Penhallow pulls permits inside the written upfront price, named line by line in the quote – not tacked on after demo day.
- A full kitchen remodel in Irving typically runs $14,000-$45,000, and the permit scope is part of that number.

What actually triggers a permit in the City of Irving
Development Services draws the line at work that changes the systems or the shell of the house. Here’s how that plays out on a real kitchen:
- New or moved electrical circuits – adding a dedicated 20-amp line for a wall oven, moving outlets for a new island, upgrading to that range hood you’ve wanted. Any new circuit or relocation pulls a permit.
- Plumbing relocation – moving the sink under a window, adding a pot filler, relocating the dishwasher. Swapping a faucet in the same spot usually doesn’t. Relocating a drain line does.
- Structural wall changes – removing or widening a wall, even a partial one, requires a permit and often a stamped drawing from a structural engineer. In Irving’s slab-on-grade ranch homes, that load-bearing wall you want gone may be carrying more than you think.
- Window modifications – new openings, resizing, or changing a window to a door. This matters here because Irving sits inside the DFW Airport noise contour and height-restricted zones, so exterior changes sometimes need a coordination step beyond the standard residential permit.
The through-line: if the job changes how water, power, or structure moves through the house, it’s permit territory. If you’re refreshing surfaces over the same bones, it usually isn’t.
The Las Colinas wrinkle no general guide covers
Here’s the part that catches Irving homeowners off guard. Homes in the Las Colinas area – and properties sitting inside zoning overlays near the DFW corridor – can carry extra city coordination on top of the standard permit process. Even an interior remodel can trip this when it touches something on the exterior wall.
A common example: you want a range hood that vents through an exterior wall. That’s an interior kitchen upgrade, but the moment the vent penetrates the wall, you’re changing the envelope of the house, and in an overlay or height-restricted zone that can mean a second conversation with Development Services. Contractors based in neighboring suburbs have never had that conversation, so they either skip it or discover it mid-job – usually after your cabinets are already sitting in the garage.
We’ve also learned to ask about prior work. If your kitchen shares a wall with an addition that was ever pulled through a Las Colinas overlay district, the city may want to see how the two connect before signing off. It’s not a roadblock. It’s a step. You just have to know it exists.

What happens if unpermitted work gets discovered
This is the part homeowners feel most, and it usually surfaces at the worst possible moment: resale or refinancing. During an Irving sale, a home inspector flags the unpermitted addition or the kitchen that got a wall moved without a record. The buyer’s lender pushes back. Suddenly the seller is paying for remediation, inspection fees, and possibly tearing out finished work – right when they’re trying to close.
Refinancing can go the same way. An appraiser notes the discrepancy, the underwriter asks questions, and the loan stalls. The cost of doing it right up front is a small fraction of what remediation runs on the back end.
The legal risk is the quieter problem. When a contractor skips the permit, the homeowner carries the liability for work that was never inspected. That’s a bad trade for a few hundred dollars.
How we handle permits – and why it’s in the written price
At Penhallow Remodeling Irving, permits are part of the job scope, not an add-on. Every homeowner gets a written price before any work starts, and that written quote specifies exactly which permits we’ll pull. The number on day one is the number on the invoice – the permit fees are already inside it.
When you’re ready to plan the work itself, our Kitchen Remodeling page walks through layout, cabinet lines, and countertop options in detail. On the cabinet side, we install KraftMaid and Wellborn. Counters run Cambria, Silestone, or Caesarstone, each carrying its own manufacturer warranty alongside our 365-Day Done Right Promise – if something fails inside that year, we come back and fix it at no charge, in writing.
Every technician who walks into your Irving home is background-checked and arrives in uniform. You know exactly who’s on the job. And if a repair ever fails, the second visit is free – no service call fee, no re-inspection charge.
What to ask any contractor before you sign
The single most useful question: “Will you pull the permit in your name?”
A contractor who does is putting their own name and reputation on the line with the city. A contractor who deflects – “you don’t need one for this,” or “we’ll handle it after demo” – is transferring legal risk to you. That’s worth a five-second pause before you shake hands.
A few others worth asking:
- Which specific permits will you pull, and are the fees in this quote?
- Who inspects the work, and when are the inspection windows?
- What’s your arrival window, and what happens if you miss it?
- Is the guarantee in writing, and what exactly does it cover?
For context on the whole scope, our home page outlines how the written-price and guarantee standard applies across kitchens, bathrooms, and whole-home remodels.
What an Irving kitchen remodel typically costs
The permit question always ends in the same place: what’s the number? Here’s how Irving projects run.
| Project scope | Typical Irving range |
|---|---|
| Full kitchen remodel | $14,000-$45,000 |
| Small kitchen remodel | $9,000-$20,000 |
| Cabinet installation | $4,000-$13,000 |
| Countertop installation | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Kitchen island installation | $3,000-$10,000 |
What drives the number up: layout changes that move plumbing or electrical (which also trigger the permit), premium cabinet lines, and natural stone counters. What keeps it down: keeping the sink and range where they are and refreshing surfaces over the same bones. The housing stock matters too – in the 1970s and 1980s brick ranches around Valley Ranch and south Irving, we regularly find original wiring and galvanized supply lines behind the walls, and that’s a permit-and-repair item you can’t see until demo day.
For any exterior patio or hardscape you’re pairing with the kitchen, our crews work with Belgard and Unilock pavers – materials that hold up through North Texas clay movement and the hail cycles that roll through every spring.
FAQs
Yes, if the work is purely cosmetic – paint, flooring, cabinet refacing, or a countertop swap over existing cabinets. The moment you add an electrical circuit, move plumbing, take out a wall, or resize a window, you need a permit from City of Irving Development Services. Call (844) 320-5939 and we’ll tell you which side your project falls on.
A full kitchen remodel in Irving runs $14,000-$45,000, and with us the permit fees are already inside that written price. You won’t see a surprise line item after demo day. Call (844) 320-5939 for an exact quote – estimates are free.
Maybe – but make them prove it. Ask directly: “Will you pull the permit in your name?” If the answer is yes, they’ll do it. If they deflect or suggest skipping it, they’re pushing legal risk onto you, and Irving inspectors will flag it during resale or refinancing. Call us for a second opinion before you sign – (844) 320-5939.
Sometimes. Homes inside Las Colinas overlay districts or airport-adjacent height-restricted zones can need extra city coordination, especially when work touches an exterior wall – venting a range hood, changing a window. Our technicians have up to 22 years of experience navigating these steps, and it’s the kind of detail written into every quote. Call (844) 320-5939 to walk through your specific block.
If you’d rather have it looked at, Penhallow Remodeling Irving offers a no-pressure assessment in Irving – call (844) 320-5939. We’ll tell you up front which permits your kitchen needs, give you a written number before work starts, and stand behind it with the 365-Day Done Right Promise.
Written by the team at Penhallow Remodeling Irving, serving Irving, TX.


