







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Refacing vs Replacement in Irving, TX: Check the Boxes Before You Check the Price
Choose cabinet refacing only if your existing boxes pass a condition audit first; otherwise replace them. In Irving, the standard refacing-versus-replacement comparison gets it backwards. This is a box-condition decision first and a cost decision second, and the condition of the boxes inside a 1970s-80s Valley Ranch or south Irving ranch is the one variable that decides whether refacing is a 10-year investment or a 3-year mistake. Cabinet work here typically runs $14,000-$45,000 for a full kitchen remodel scope. Call (844) 320-5939 for a free written assessment before you decide.

The honest answer isn’t a dollar figure. It’s a flashlight and ten minutes.
Before anyone quotes you either scope, we ask Irving homeowners to do something a little unusual: open the lower cabinets, get down on the floor, and take a real look inside. The boxes are the structural skeleton of your kitchen. New doors and veneer over a failing box is a cosmetic cover-up. New doors over a sound box is money well spent.
Here’s why this matters more in Irving than in a lot of places. Much of our housing stock is 1970s-80s brick ranch tract construction, and a good share of it sits on slab-on-grade. North Texas clay soils swell and shrink with every wet-dry cycle, and that movement translates into moisture that creeps up through the slab perimeter and into cabinet bases. A kitchen can look perfectly fine at eye level and be quietly rotting at the toe kick.
How to audit your own boxes: four things to check
This is the same walk-through our crew does on a first visit. You can do it yourself in about ten minutes with a flashlight.
- Moisture damage at the base. Look at the bottom panel and the toe kick inside the lowest cabinets, especially those against an exterior wall. Dark staining, soft spots, a musty smell, or wood that gives when you press it with a screwdriver all point to moisture. In Irving slab homes, this is the single most common failure we find.
- Corner joint integrity. Grab an upper cabinet near a corner and give it a gentle push and pull. A solid box stays rigid. A failing box rackets, and the corner joint opens. If the box twists, no amount of new veneer will fix it.
- Box material type. Solid wood and quality plywood show layers or grain at the edges. Particleboard looks like compressed sawdust under a thin skin, and it fails differently. Look at the inside of a drawer opening or the exposed edge of a shelf where the finish has worn.
- Sagging shelves under load. Pull a shelf and sight down it. A shelf that sags when loaded tells you the box and shelf material has lost stiffness or picked up moisture over time.

The particleboard problem nobody talks about in North Texas
Here’s where a western-exposure kitchen in Irving gets especially tricky. Cabinets on a west-facing wall soak up afternoon sun, and a kitchen can reach 90°F or hotter on a summer day even with the AC running. When refacing veneer is bonded to particleboard in those conditions, the adhesive goes through heat-cycling it was never built for. We’ve seen veneer peel and delaminate within 2-3 years on exactly this setup. That’s not a workmanship issue you can paper over with a better glue. It’s a material mismatch with the climate, and it’s the reason the box material check above comes before any talk of budget.
Solid wood and quality plywood boxes hold adhesive far more reliably through those swings. That’s the physical basis for the threshold rule below.
The threshold rule we use
Internally, Penhallow Remodeling Irving applies a simple, honest line:
- Solid-wood or quality-plywood boxes, no moisture damage, joints sound: refacing is a smart 10-year investment. Keep the boxes, upgrade the doors, drawer fronts, and hardware, and put your money where you’ll see and feel it.
- Particleboard boxes, or any moisture damage, or failing joints: replacement is the honest recommendation, even though it costs more up front. New KraftMaid or Wellborn boxes give you a base that will hold up to Irving’s heat and soil movement.
We’ll tell you which category your kitchen falls into before quoting either scope. Refacing isn’t always the budget-smart choice. It’s the budget-smart choice only when the boxes earn it.
Cabinet refacing vs replacement: a side-by-side
Once your boxes pass (or fail) the audit, here’s how the two paths compare on the numbers and the trade-offs.
| Factor | Refacing | Replacement |
|---|---|---|
| Best fit | Sound solid-wood or plywood boxes, no moisture | Particleboard boxes, moisture damage, failing joints |
| What changes | Doors, drawer fronts, veneer, hardware | Everything, including the boxes |
| Typical area budget | Lower upfront | Higher upfront; new kraftmaid/wellborn box integrity |
| Climate risk | Veneer adhesion on particleboard in western exposure | None from adhesive; new material rated for the climate |
| 365-Day guarantee covers | Veneer adhesion, door alignment, hardware function | Box squareness, drawer operation, finish consistency |
If you’re planning the surrounding work at the same time, our guide to Kitchen Remodeling lays out how cabinets fit into a full remodel scope and budget.
What the 365-Day Done Right Promise means on each path
The written guarantee works differently depending on which route you take, because the risks are different. On a refacing job, the 365-Day Done Right Promise covers veneer adhesion, door alignment, and hardware function. On a replacement job, it covers box squareness, drawer operation, and finish consistency. Either way, you get a written price before any work starts and a written guarantee when it’s done, so the number on day one is the number on the invoice. If the work fails inside the guarantee period, we come back and fix it at no charge. That’s the Kingswell standard: say the price before the work, show up in the window we gave, leave the place cleaner than we found it.
We install KraftMaid and Wellborn cabinetry and source materials from trade brands like Cambria, Silestone, and Caesarstone for countertops, so the products behind the promise match the promise itself. Every technician is background-checked and arrives in uniform, and a real person answers the phone around the clock when you call.
Why Irving kitchens need this check more than most
Irving is a built-out inner-ring suburb, and its housing stock tells the story. The 1970s-80s ranch homes in Valley Ranch and south Irving were built on slab foundations, and the clay soil movement that defines North Texas remodeling means foundation and moisture work is a constant. Much of the city also sits inside the DFW Airport noise contour and height-restricted zones, so anything tall or structural near a flight path can trigger coordination other suburbs never deal with. For cabinets, the practical takeaway is simpler: assume moisture before you assume sound boxes, and verify.
What a refacing or replacement budget looks like in Irving
Cabinets are one line in a bigger picture. Here are the market ranges we quote in Irving so you can budget realistically before we ever see your kitchen:
- Full kitchen remodel: $14,000-$45,000
- Small kitchen remodel: $9,000-$20,000
- Cabinet installation (replacement path): $4,000-$13,000
- Countertop installation: $2,000-$6,500
- Backsplash installation: $800-$2,500
- Kitchen island installation: $3,000-$10,000
For broader context on how these line items stack up, see our Kitchen Remodeling in Irving page. If you’re weighing other projects too, our guides to bathroom remodeling in Irving, bathroom remodeling, home additions in Irving, and roof replacement in Irving show how the region’s climate and housing stock shape each one. Planning around the storm season? Our roof repair in Irving and window replacement in Irving pages cover the exterior side. You can also read about driveway replacement in Irving and paver patio installation in Irving if the work spills outdoors. Start from our home page to see the full range of what we handle.
FAQs
Cabinet replacement in Irving typically falls within a cabinet installation budget of $4,000-$13,000, while refacing costs less upfront but only pays off when the boxes are sound. A full kitchen remodel that includes new cabinets runs $14,000-$45,000 depending on layout, cabinet line, and countertop material. Call (844) 320-5939 for an exact written quote; estimates are free.
Refacing is cheaper upfront, but only if your boxes pass a condition audit. On particleboard boxes or any box with moisture damage, refacing is cheaper now and more expensive later, because veneer adhesive on particleboard in a hot western-exposure kitchen can delaminate within a couple of years. Replacement is the honest call when the boxes fail. Call us to find out which category your kitchen is in.
They can be refaced if the boxes are solid wood or quality plywood, have no moisture damage at the base, hold rigid at the corners, and the shelves don’t sag under load. Grab a flashlight, check the toe kick for staining or soft spots, and push a corner to test for racketing. If it all passes, refacing is a smart 10-year investment. Call (844) 320-5939 and we’ll confirm before quoting.
We schedule assessments quickly across Irving, and a real person answers the phone around the clock, so you’re not stuck in a voicemail maze. We’ll check your boxes in person, tell you plainly whether refacing or replacement is the right call, and give you a written price before any work starts. Call (844) 320-5939 to book yours.
If you’d rather have it looked at, Penhallow Remodeling Irving offers a no-pressure assessment in Irving. We’ll bring the flashlight, check the boxes, and tell you honestly whether refacing or replacement makes sense for your home. Call (844) 320-5939 for a free estimate.
Written by the team at Penhallow Remodeling Irving, serving Irving, TX.


